B&B Manufacturing Corp

Manufacturers

1 Comment

B&B Manufacturing Corp is a Puerto Rico based spark plug wire manufacturer established in 1985. It manufactures spark plugs that are compatible with many branded vehicles in Europe, Korea, and Japan. B&B Manufacturing Corp exports most of their spark plug wire sets to other countries such as North America, Caribbean, South America and Central America. It has gained many awards in the past such as Recognition for Entrepreneur Success, Exporter of the Year, and Excellence in Quality. All the wire sets are manufactured in the USA to ensure the highest quality and the best EMI/RFI noise suppression.

B& B offers a variety of ignition parts including B & B suppressor, Platinum Class Laser Mag, The Platinum Racing Wire and B& B Coil on Plug. The B & B suppression wire is made from a latex silicone to offers good electric conduction. The core of the wire is static free and covered with carbon to prevent it from getting burned. It is available in 3 different lengths including 5 mm, 7 mm and 8 mm. The 7mm suppression wire is used in European models. B&B provides a 36 months warranty for the suppressor wire sets.

Platinum class laser mag suppression wire is a high quality stainless steel wire that can be used as replacement for a suppressor. The wire is wound around the suppressor and it meets the OE specs. The Platinum class laser mag is available in a 7mm silicone copper wire used in European models. The Platinum class laser mag suppression wire is covered with up to 12 months of warranty.

OML platinum racing wire is one of the best conductors for use in race car and high performance car. The wire is wound tighter around the suppressor at about 25 ohms. There is a variety of resistance levels to choose from including 300, 40, and 25 ohms. They offer an extra thick version that measures about 10mm in length. They also offer an 8.5 mm wire with a resistance level of about 500 ohms per foot. They offer 3 colors for the exterior silicone jacket. It comes packaged in a carton box or it can also be packaged in a plastic clamp. They offer a 1 year warranty for the OML racing spark plug wire.

B&B coil on plug is a direct ignition that offers a high level of resistance against high temperature. It can enhance the engine’s combustion by producing the right voltage output and can help your vehicle to have better fuel economy.

You can browse the entire selection of B&B spark plug wire sets using the online catalog at the B&B Manufacturing site. You can browse the online catalog by several criteria including year, and make/model. They would also mail you a copy of their catalog if you send them a request by email or slow mail. Every month, B&B offers discounts and freebies which is listed on their site. You can buy B&B Manufacturing Corp.spark plug wires at many local and online stores.

The headquarter of B&B Manufacturing Corp. is located at PO Box 9574 San Juan, PR 00908 Tel (787) 798-3272.
***
Bando

Bando is a leading manufacturer of rubber automotive products founded in 1906 and based in Kobe, in Japan. It is ranked as the 3rd most popular automotive belt manufacturer in the world. Their primary product is the power transmission belt and conveyor belt. Bando’s automotive belt is suitable for both industrial and agricultural use. It offers a complete line of belt for light, and heavy duty trucks. The first power transmission belt that Bando invented is the cotton power transmission belt.

Bando has pioneered a large variety of power transmission products with more than a century of involvement in the industry. Bando is an award winning OEM supplier for a variety of brand name international vehicle manufacturers such as Toyota, Nissan and Honda. Bando belts are precision ground two times make sure that they comply with the OEM standard. Unlike other belts, Bando’s belts are not manufactured in a mold process. Belts that undergo a mold process are lower quality because they do not have the same rib profiles as the OEM product. EPDM rubber, which feature a high heat resistance and durability is used to produce Bando belt.

Bando serpentine belts are made with high quality tensile cords that is capable of carrying a high level of horsepower without any stretch. The ground rubber ribs are made with synthetic rubber with high strength so that it can resist against wear and tear. Bando serpentine belt is suitable to be used as a replacement for your OEM belt. The Bando belt you buy at the store is the same as the old belt that is installed in your vehicle.

Bando timing belt features precision molded teeth and meet the no slip drive requirement. The tensile cord in the Bando timing belt is optimized for carrying the maximum load. It features rubber backing to provide protection against abrasion oil and heat.

Bando V belt is designed for vehicles that are used frequently because it can withstand high mileage. It is reliable, affordable and resistant against oil and heat. It is available in various sizes for different makes/models of vehicles. Bando V belt can be used as OEM replacement for your car, bike and scooter.

All Bando’s belts are covered with one year warranty starting from the shipment date. The warranty involves repairing of the product or replacement of a similar product for completely free of charge. You must send back the defective Bando product back to the manufacturer and you will be responsible for paying the return shipping fee. To claim the warranty, make sure you don’t get it repaired or modified without getting permissions from Bando.

The main manufacturing plant is located in Bowling Green, Kentucky. They also have factories in fifteen countries around the world that are set up to produce OEM quality belt for the locals. Their manufacturing facilities have been certified with 3 ISO certifications including ISO-9001:2000, TS16949:2002 and ISO-14001. Bando’s headquarter is situated at 1149 West Bryn Mawr Itasca, IL 60143 Tel 630-773-6600.

AVS

Manufacturers

0 Comments

AVS is a brand owned by Lund International which was founded in 1965. Lund International is responsible for several international automotive brand names including AVS, Lund and Belmor. AVS, also known as Auto Ventshade was founded in 1935 and the first product they debut is a vent shade mounted on top of the car windows. Today, AVS produces a variety of accessories for vehicles including side window vent, hood protection, door handles, mirror cover, headlight cover, and tail shade cover.

AVS Side Window Vent is designed to fit a large variety of vehicles. It allows optimal circulation of the air in the vehicle while preventing the rain from entering at the same time. The atmosphere in your vehicle will be cooler when you park your vehicle in the open space under a hot sun. There are 3 styles of AVS vent visors including high profile, low profile and in channel.

AVS hood shield will protect your hood and windshield against all kinds of dirt and debris. AVS hood shield is suitable to be fitted in cars, SUVs, and vans. There are several models of hood shields including Bugflector, Hoodflector, Carflector, and Aerokin. Bugflector is a medium profile hood shield with a traditional design. Bugflector II is a higher profile hood shield that features a full wrap design. Hoodflector is a lower profile wrap design style hood shield. Carflector is a lower profile hood shield that also has a wrap design style and can be used for car and SUV. Aerokin is another lower profile hood shield by AVS that features a flush mount and offers protection for contour style hood.

AVS offers several types of door handles including standard, tailgate and lever door handle covers. AVS chrome door handle cover adds an aesthetic look onto the chrome trim on the exterior of your vehicle. It is made with ABS that has been chrome plated and it meets the OEM standards. It is very easy to install the AVS chrome door handle because there is no need to perform any drilling. All you need is an automotive tape that is OEM approved. AVS door handle covers are available for both 2 doors and 4 doors vehicles.

AVS chrome mirror cover is made with an OEM standard chrome that will add a luxurious look to your vehicle. You can easily install the AVS outside mirror cover with a strong 3M automotive tape.

AVS chrome fuel door cover is plated with real chrome and will improve your car’s look tremendously. Just like the mirror cover, you can install it onto your car with the 3M automotive grade tape.

AVS headlights cover features an aerodynamic design and will protect your headlights from damages. It is available in two designs including smoke and impact modified acrylic. AVS tail shades offer a custom look that matches with the contour design on your car.

All AVS products are covered with a warranty coverage that last up to 3 years. The warranty is voided if you uninstall the products from your vehicle. The warranty is non transferable and AVS can repair or offer a full replacement if your claim is approved. The warranty will not cover if it gets damaged due to misuse, wrong installation or hazards that occur when you are driving on the road. You must call the customer support telephone line and ask how you can return the item. The return item will only be approved after you have obtain authorization from Lund International.

The main manufacturing facility and warehouse of Lund International are located in Buford GA. The facility covers an area of 219,000 sq. ft. while the warehouse covers an area of 193,000 sq. ft. The headquarter of Lund International is located at 4325 Hamilton Mill Road, Suite 400 Buford, GA 30518 Tel 1-800-241-7219.

AutoSpecialty / Kelsey-Hayes Auto Parts

Manufacturers

0 Comments

AutoSpecialty is a brand name of TRW Kelsey-Hayes Company that specializes in a variety of automotive brake parts including brake kit, caliper, and brake shoes. TRW/Kelsey-Hayes is a conglomerate of two leading automotive suppliers that export their products to countries around the world. TRW Automotive is a manufacturer of a wide range of automotive systems founded in 2002. Founded in 1927, Kelsey Hayes is originally a wire wheel company but it added brakes to its product line in 1929. AutoSpecialty’s brake parts use Power Stop brake technology. Power Stop is a company founded in 1995 that provides a wide range of braking solutions.

AutoSpecialty brake kit comes with the brake pad and rotor. AutoSpecialty brake pad is made from the Power Stop Evolution ceramic pad that uses a low dust formula to keep your wheel clean. The surface of the pad has been thermal scorched so that you can execute a rapid break in. The premium rubber shims offers a smooth brake and get rid of the noises when you brake. The braking plate has been coated with powder for protection against rust and corrosion. It features the same chamfered and slotted design as in the OE version. The 1 click OE AutoSpecialty brake kit can help you to save money when you buy 2 or 4 brake rotors.

AutoSpecialty caliper is coated with a layer of electrostatic power that is high heat resistance. The high heat powder coating provides resistance against corrosion and makes it easier for you to clean the caliper. Every caliper is pressure tested and inspected thoroughly to ensure optimal performance. Only brand new components are used for example, they use new bleeder screws. The EPDM rubber is able to withstand high temperature so that it can last for a longer time. They lubricate the caliper with a layer of premium silicone lubrication for smoother operation.

AutoSpecialty brake shoe is a semi metallic asbestos free and copper free brake shoe that aims to give you a faster brake-in time. It is made from a completely new steel with a layer of black coating to provide resistance against rust. The brake shoes feature a chamfers design to eliminate noises when you are applying the brake. It is precision cam ground so that it will fit exactly onto the drum.

AutoSpecialty brake kit is covered with a warranty of up to 90 days/30,000 miles starting from the purchase date. They will exchange the defective product with a new product if it didn’t work when you install it in the right vehicle. The warranty does not provide coverage for normal wear. AutoSpecialty caliper is also covered with a 90 days warranty or up to 30,000 miles. This warranty is not valid if the component fail because you use DOT 5 fluid that is made from silicone. The warranty also does not apply to bleeder screws that have been stripped because you over tighten it too much. To be able to claim the warranty, you must not make any modification to the product.

The headquarter of TRW Auto Specialty is located at 800 E 230th St Carson, Los Angeles, California, USA Tel (310)- 513-2060.

AutoLite

Manufacturers

0 Comments

AutoLite is a manufacturer of spark plugs and ignition parts for brand name cars such as Chrysler and Studebaker. The company was founded in 1911 when two companies that manufacture buggy lamps switch to the automotive industry. It all started when Royce G. Martin, the CEO of the Electric Autolite Company opened a lab to produce their first spark plug. Robert Twells, who leads the project did research on many patents at that time to create the spark plug. The first autolite spark plug was successfully invented in 1936 in Fostoria, Ohio. Today, AutoLite is a leading brand name for spark plugs for race cars, sports car, and lawn mowers.

Autolite Iridium XP Enhanced Alloy Technology spark plugs are made with the platinum sidewire technology and features the iridium 0.6 mm finewire design. This spark plug offers a higher level of ignitability compared to similar spark plugs by other brands. It is covered with a warranty coverage of up to 7 years.

Autolite Double Platinum Spark Plugs aims to increase efficiency by minimizing the misfires. Some of the highlighted features are platinum-to-platinum firing, remove almost all gap erosion and can be used in the DIS engines. It is covered with a warranty of up to 5 years.

Autolite Platinum spark plugs features a wire platinum firing tip. It is more durable and will give your car a better performance. It is covered with a guarantee of up to 4 years.

Autolite Copper spark plugs offer several benefits for your vehicle including higher fuel economy, and engine start faster. You will also enjoy a smoother acceleration when you use Autolite copper spark plug.

Autolite Glow plug is a reliable spark plug ideal to be used in vehicles powered by diesel engines. The Autolite Glow plug comes with an industry standard warranty coverage.

Autolite Revolution HT High Thread Spark Plugs features a unique patent technology that will offer better heat transfer and ignition power for your engine.

Autolite racing hi-performance spark plug is endorsed by NASCAR and has been used by many professional race car drivers. The spark plug is covered with a layer of anti corrosive nickel plating. It has a large electrode designed to increase the heat transfer to your engine. The racing spark plug is compatible with a variety of Ford engines including 4.6 L, and 5.4 L.

Autolite offers two types of spark plugs for sports and dirt bikes. The Autolite XtremeSport spark plug features a 0.6mm firewire design and can endure a high temperature that occur during racing. It is 26% faster than the standard plugs and emit 21% lesser hydrocarbon compared to the standard spark plug. Autolite small engine spark plug is an OE compatible spark plug suitable for a sports bike with small engine.

There are two types of spark plugs for lawn mowers including Autolite Xtreme Start and Autolite Small Engine spark plugs. Autolite lawn mowers spark plugs feature an iridium enhanced platinum design for higher durability and more stable performance.

Autolite is a brand name that belong to UCI-FRAM and the company’s headquarter is located at 1900 West Field Court Lake Forest, IL 60045 Tel 855-200-5200.

AutoLine

Manufacturers

0 Comments

Autoline is a re-manufacturer of a variety of high quality automotive products founded in 1996 and based in Canada. The company was incorporated as AutoLine Products Ltd. In 2003, they acquired Tarani Rebuilders Inc., a company that is recognized for rebuilding CV axles and rack and pinion. Some of the different re-manufactured product lines Autoline offer are carburetors, distributors, rack and pinion and water pumps. brake calipers and throttle air. Autoline is a member of the Automotive Parts Rebuilders Association.

AutoLine started with a small repair facility and as their business grow, they relocated to a large repair facility that covers an area of 5,000 square foot. They relocated to a 30,000 sq. repair facility and finally relocated to a 50,000 sq. ft. factory in Winnipeg today. Over the years, they have added various products and remanufactured lines into their catalog. AutoLine operates 10 warehouses in Canada and USA. Their USA based warehouse is located in Minneapolis in Minnesota. Other warehouses are located in Canada including British Columba, Alberta, Manitoba, Ontario, and Maritimes.

Every products of Autoline are remanufactured according to the specs of the original equipments. They will incorporate product identification to maintain the standards. They only source premium parts when re-manufacturing the products. They will scrap off old castings and replace with a new casting if it does not meet their standards.

During the re-manufacturing process, they will disassemble all the components and stamp them to prevent using the wrong parts during the reassembly. Once the components have been disassembled, they will perform inspection on every single internal components including gaskets and seats. If the finishes on the exterior of the part has been worn off, they will restore it back to factory finish. Aluminum castings will be sandblasted so that the finishes will be restored back to the original.

The technician at AutoLine will process and inspect every component to make sure they are repaired properly. If the part needs replacement, they will replace it with the right part. The completed product will undergo a variety of testings including electrical resistance, calibration, mechanical, electronic advance curves. Adjustments are made if they found that the automotive part is not working properly. They will include installation instruction when packaging the product.

AutoLine’s automotive parts are available for sale at many local and online stores. You can find their warehouse service location at their site.

Most of the Autoline’s vehicle parts are covered with warranty. The warranty vary depends on which type of product you buy. AutoLine’s carburetor is covered with a 90 days warranty coverage. AutoLine offers 1 year warranty coverage for products such as multi-port injectors, distributors, throttle body injection units, rack and pinion, and water pumps. Products such as power steering, brake calipers, and rack and pinion are covered with 2 year warranty/40,000 km. The CV axles are covered with 5 years warranty. The 90 days warranty applies if you use these products for commercial or offroad uses.

AutoLine’s head office is located at 675 Golspie St. Winnipeg, MB R2K 2V2 Tel (204) 668-8242.

AutoBest

Manufacturers

0 Comments

AutoBest is a manufacturer of fuel system component that was founded in the year of 1994. The concept to start this company started in 1992, two years before the company was founded. They have a factory of Autobest in China, where they employed more than 700 people. After the fuel pumps are manufactured in China, they are imported and distributed from the facility at S. El Monte, CA. AutoBest’s fuel system is designed to meet the OEM standards and they are ISO/TS certified. Some of the ISO TS certifications they hold are ISO9001/2000, ISO14001/2004, and 16949: 2002 Certified.

Prior to the distribution of the products, they done an extensive test to make sure that it is working properly. Every product has to undergo a testing period that last for up to 2,500 hours Some of the different types of tests each fuel pump has to undergo are peak pressure operating pressure, and valve operation test. You can browse the fuel pump product range at the online fuel pump catalog at AutoBest’s website.

AutoBest’s fuel pump consists of 3 important components including turbine, gerotor, and rollervane. Every single part of the fuel pump system is made with the high quality of materials. The best grade of metals as well as wiring are used to make sure it has optimal performance.

AutoBest’s headquarter is situated in California but they also have 6 branches located in different countries. The headquarter office in California is equipped with 30 employees and they hire 75 employees for the international branch offices. It is estimated that AutoBest experience a revenue growth of more than 300% during a period of between 1998 – 2003. There are more than 10,000 auto body shops that provide repair service for AutoBest’s fuel pump system. There are over 200 dealers that carry AutoBest’s products. At least 10 warehouses have been established to increase the speed of the product delivery to the clients.

AutoBest’s warranty applies to any AutoBest product that has been defective under normal use within 1 year period. The warranty coverage is not valid if the fuel system fail to work because you install in incorrectly, modify it, or get it repaired at an unapproved repair center. The warranty also is not valid to the filter, strainer as well as the gasket.

If you want to claim the warranty, you must be able to produce the invoice that has the purchase date. AutoBest will replace the defective product at no cost upon checking and confirming that the defective product is qualified for the warranty coverage, You must obtain a RMA request if you want to return a product. If you have two products that you want to return in a single day, you must obtain 2 RMA codes. If you return a product to get a refund, they will refund you the purchase price minus a 15% restocking fee.

Autobest International Corp’s headquarter office is located in 2500 Troy Ave. S.El Monte CA 91733 USA Tel 1-800-773-6088

Auto Extra

Manufacturers

0 Comments

Auto Extra supplies and provides fitting services for custom fit outs for all kinds of vehicles. Founded in 2004, Auto Extra is based on Osborne Park in the western part of Australia. The products are made with high quality workmanship and have reasonable pricing.

Auto Extra offers a full line of Hayman Reese towbars and accessories that are designed to fit your vehicle. The towbar is tested to confirm it meets the basic requirements of the Australian Standard AS/NZ4177. The towbars are covered with a layer of premium powder coating to improve the damage resistance. They offer several styles of towbars including receiver, standard, lamp protector and bolt on steps. Auto Extra’s towbars are backed with a lifetime warranty coverage.

Auto Extra roof rack provides thousands of Rola & Thule roof racks that can be fitted on all kinds of vehicles including cars, four wheel drive, and vans. Rola roof racks features an aluminum crossbar that is designed to reduce the noise from the wind. Rola Roof features a global channel crossbar that is equipped with non ferrous stainless steel. Some of the different styles in Thule roof racks are professional, slide, and square bars. Thule roof rack is lighter and has a better aerodynamic design compared to Rola Roof. With a Thule roof, you can fit a roof rack that is up to the full width of your car roof. Auto Extra offers a 5 years replacement warranty for the Rola & Thule roof racks.

Auto Extra bull bar is made with a hi tensile alloy that has high resistance against rust. The most important part of the bull bar is the center channel section which measures 6mm thick. Every single bull bar is put under a variety of tests to make sure it is strong enough to withstand against the external impacts. Auto Extra offers several types of bull bar including Arc winch bar, arc bar, type 8 bar, nudge bar, BigTube winch bar, Big Tube Bar, Midi Tube bar, Series 2 Nudge Bar and 76mm Ultra nudge bar. All Auto Extra’s bull bars are covered with a lifetime warranty and they are also compatible with the new vehicle warranty.

Auto Extra is the supplier of Kingsley side steps for all kinds of vehicles including SUVs, trucks, and four wheel drive. Auto Extra is compatible with many brand name SUV including Dodge, Ford, Kia, Landrover, Mazda, Mitsubishi, Nissan, and Toyota. Auto Extra offers 3 types of side steps including blade runner, integra, and step boards. Both the Integra and Blade Runner side steps are covered with a warranty that last for a period of 5 years.

Auto Extra’s fuel tank is made with the most advanced CAD/CAM computer controlled design and is suitable for people who want to travel in long distance. To increase the durability, they use a 2mm aluminized steel and use the metal inert gas welding technique to wield it. Auto Extra’s fuel tank is covered with a 2 years warranty.

Auto Extra’s snorkel system is suitable for four wheel drive vehicles in Australia. The snorkels are made from high quality cross linked polyethylene and sealed positively so that your engine will have a better performance. Besides, Auto Extra is also the supplier for other products including canopies, van shelving, bike carriers,

You can buy Auto Extra products from local or online distributors. The headquarter of Auto Extra is located at 15 Frobisher Street Osborne Park W.A 6017 Tel 08 9201-1888

***

AutoBest

AutoBest is a manufacturer of fuel system component that was founded in the year of 1994. The concept to start this company started in 1992, two years before the company was founded. They have a factory of Autobest in China, where they employed more than 700 people. After the fuel pumps are manufactured in China, they are imported and distributed from the facility at S. El Monte, CA. AutoBest’s fuel system is designed to meet the OEM standards and they are ISO/TS certified. Some of the ISO TS certifications they hold are ISO9001/2000, ISO14001/2004, and 16949: 2002 Certified.

Prior to the distribution of the products, they done an extensive test to make sure that it is working properly. Every product has to undergo a testing period that last for up to 2,500 hours Some of the different types of tests each fuel pump has to undergo are peak pressure operating pressure, and valve operation test. You can browse the fuel pump product range at the online fuel pump catalog at AutoBest’s website.

AutoBest’s fuel pump consists of 3 important components including turbine, gerotor, and rollervane. Every single part of the fuel pump system is made with the high quality of materials. The best grade of metals as well as wiring are used to make sure it has optimal performance.

AutoBest’s headquarter is situated in California but they also have 6 branches located in different countries. The headquarter office in California is equipped with 30 employees and they hire 75 employees for the international branch offices. It is estimated that AutoBest experience a revenue growth of more than 300% during a period of between 1998 – 2003. There are more than 10,000 auto body shops that provide repair service for AutoBest’s fuel pump system. There are over 200 dealers that carry AutoBest’s products. At least 10 warehouses have been established to increase the speed of the product delivery to the clients.

AutoBest’s warranty applies to any AutoBest product that has been defective under normal use within 1 year period. The warranty coverage is not valid if the fuel system fail to work because you install in incorrectly, modify it, or get it repaired at an unapproved repair center. The warranty also is not valid to the filter, strainer as well as the gasket.

If you want to claim the warranty, you must be able to produce the invoice that has the purchase date. AutoBest will replace the defective product at no cost upon checking and confirming that the defective product is qualified for the warranty coverage, You must obtain a RMA request if you want to return a product. If you have two products that you want to return in a single day, you must obtain 2 RMA codes. If you return a product to get a refund, they will refund you the purchase price minus a 15% restocking fee.

Autobest International Corp’s headquarter office is located in 2500 Troy Ave. S.El Monte CA 91733 USA Tel 1-800-773-6088

Auto 7

Manufacturers

0 Comments

Auto 7 is a leading manufacturer of automotive parts for various Koran brand name vehicles. The specializes in manufacturing automotive parts for 3 Korean brand name vehicles including Hyundai, KIA, and Daewoo. Auto 7 is based in Miramar, Florida and they are in partnerships with several docks for dealing with the shipments daily. There are more than 305 types of automotive parts in 14 different categories with all parts being ISO certified. They offer high quality automotive parts that are made in Korea and meet the strict quality standards.

Auto 7’s Precise fuel pump is manufactured by OEM suppliers and meet all the OEM specs. It is suitable for all make/model and can be used on more than 15,000 applications. It is made with the most advanced turbine technology and is equipped with high quality carbon brushes. Precise pump is completely new without any core and it is designed to reduce noises. Every single pump has to undergo a thorough test before it is being packaged. Auto 7’s Precise fuel pump is covered with up to 1 year warranty and is TS 16949 certified.

Auto 7’s automotive part is guaranteed to fit into your vehicle and function at the first time you install it. They manufacturer all models of automotive parts and they have a collection of more than 70,000 parts available up to date. Some of the automotive parts they offer are engine, rotating electrical, brake & clutch, fuel and filter. They offer a fair price for their products and fast turnaround for both small and large orders. Auto’s 7 products are sold in the aftermarket industry as well.

Auto 7 has received several awards in the past, Auto 7 was named Repworks Marketing Manufacturer Representative of the Year on the 19th November 2014. They were named an Approved Vendor for Automotive Parts Associates on the 2nd July 2014. Auto 7 Inc. is recognized as the Preferred vendor for National Pronto Association.

Auto 7’s automotive parts can be purchased at many online and offline authorized distributors. If you are wondering where you can buy Auto 7’s parts online, you can check out the retailers list at the official site. You can browse the entire range of automotive products at the online catalog. You can also order directly from the manufacturer’s site by clicking on the Place Order button. After placing an order, you will be able to check the order status in your account. To find out whether a part is available, you can click the Check Availability button.

All parts are covered with a warranty of at least 1 year and up to 12,000 miles. To claim a warranty, you must send in a document to confirm the work is being done by a mechanic that has been ASE certified or you must obtain a copy of the repair order. The warranty won’t be considered if you fail to provide either documentation.

The main office and distribution facility of Auto 7 is located at 2401 SW 145th Avenue Miramar, Florida 33027 Tel (866) 777-8498.

Atsco

Manufacturers

0 Comments

Atsco Remanufacturing Inc. is one of the leading suppliers of remanufactured steering systems in the USA. Atsco was founded in 1983 with 14 employees but now they have grown into a huge company with more than 350 employees. The company was acquired by BBB industries, LLC on the 3rd of June in 2005. Some of the different types of steering products they offer are power steering pump, rack & pinion, steering gear, inline filter, control valve, and electronic power steering.

For the power steering pump, they will inspect all the components including bushings, bearings, reservoirs, and other internal components to see whether they are worn and need to be replaced. To make sure the power steering is leak proof, they will install new o-rings on the inlet as well as the outlet. They will use OE standard seal and o-rings so that they will last for a long time. The input shaft is measured and replaced if it is damaged and they will also replace campack rings that have been resurfaced.

In the rack & pinion, they will recondition the shafts so that it has the exact same finishing that matches with the OE standards. Every single line in the rack & pinion will be cleaned, tested and replaced. They will also inspect the port threads and provide new o-rings to make sure the rack & pinion is leak proof. If necessary, they will also reinstall new seal packs to increase the performance. The clamps they used in replacing the old clamps are made from stainless steel material.

For the steering gears, they will perform inspection on every single internal component and check to see if there is any wear and tear. If they found a worn out component, they will replace it. The gearbox will be reset to the OE specs and they will clean the mounting threads. The professional engineers at Atsco will fix OE quality O-ring and seal packs and replace the input/output shafts if necessary.

Atsco will disassemble and inspect the control valve as well as the power cylinders for worn parts, Both the control valve and power cylinders will undergo a variety of tests to ensure optimal performance including pressure, steering effort, leakage and whether the valve is working properly. For the control valve, they will inspect the ball stud, boot and clamp will be inspected. The parts that will be inspected in the power cylinder are piston, stud boot shaft seals, ball stud and shaft bushing.

Atsco’s electric power steering is available for different make/model of vehicles including Chevrolet, Saturn and Pontiac. Some of the parts that Atsco provide for the electric power steering system are steering assist motor, steering column and column intermediate shaft.

All Atsco parts are covered with at least 1 year of unlimited mile warranty coverage. Every single steering parts are re-manufactured in the USA. You can buy Atsco’s re-manufactured steering systems from online and local automotive parts stores.

The main office and warehouse of Atsco are situated at 4525 North 43rd Avenue Phoenix, AZ 85031-1509 Tel 800-261-4861.

ATE North America

Manufacturers

0 Comments

ATE North America

ATE North America is a leading manufacturer of brake systems for European vehicles in the USA. ATE has been established in the industry for more than a century. The founder of the company is Alfred Teves who established it 105 years ago. They invented the first hydraulic brake system in 1926 and the first anti-lock braking system in 1967. ATE PremiumOne Rotors features the patented RotorLife wear indicator, which will let you know when your rotor is damaged and has to be replaced. The MetaCote coating can protect your rotor from dirt as well as corrosion. It is equipped with an OE brake system technology and will function just like your old original equipment rotor.

ATE PremiumOne Pads features advanced friction formulation that can increase the lifespan of the pad and reduce the amount of dust that accumulate on the wheel. The premium friction grade and unique pad under layer design enable your brake to function quietly without a lot of vibration. The pad has already been enhanced with all the safety components so that you can save money in performing repairs.

ATE Ceramic Brake Pads is equipped with an innovative fiber technology that produces a layer of the transfer film that can reduce brake dust and slow down the wear and tear. ATE brake products are available for several European brand name vehicles in the USA including Mercedes-Benz, Porsche, and Volvo.

ATE offers 5 types of brake fluids including ATE G, ATE SL, ATE SL 6, and ATE TYP 200. The new ATE SL.6 fluid is a thin bodied brake fluid designed to generate a rapid response time for the ESP system. It has a faster reaction time compared to an ordinary brake fluid. The ATE SL.6 can be used as a replacement for Super DOT 4 and is designed to be used in electronic brake system. ATE TYP 200 will cause a minimal drop on the boiling point because it has a unique water binding property. Both the ATE G and ATE SL brake fluids are covered with 1 year warranty. The ATE SL6 is covered with 2 years of warranty while the ATE TYP 200 is covered with 3 years of warranty. ATE brake fluids are environmentally friendly and safe to use as stated in the ESH Policy Statement.

All automotive products by ATE North America including brake rotors and brake pads are covered with a limited warranty coverage. The limited warranty coverage, which is issued by Continental Teves, Inc, will last up to 12 months. This warranty coverage will be voided if it is modified, damaged, or not used in a way that is recommended by ATE. Before you can claim the warranty, a CTI sales representative must first inspect it and give the approval. When filing for a claim, you must include information such as customer’s name, telephone number, address, make/model of your vehicle, purchase invoice and signature of the person who install the part.

The main headquarter office of ATE North America is located at 6755 Snowdrift Road Allentown, PA 18106 Tel 800-564-5066.

Page 1 of 41 2 3 4